| Actuator drive output |
Analog input | Analog output | Digital input | Digital output | Voltage sensing |
Current sensing |
Inductive or Hall pick-up |
RS-232 RS-485 |
CAN bus |
| 1x H-drive 4 ... 20 mA 0 ... 200 mA 0 ... 5 Volt +/-10 Volt PWM |
4x 4 ... 20 mA | 3x 4 ... 20 mA | 16x binary LED status |
8x relay |
3-phase Gen/Bus Voltage AC RMS |
3-phase Gen Voltage AC RMS |
2x MPU or 2x Hall |
1x Ethernet (TCP-IP) 1x RS-232 (DB9)1x RS-485Modbus1x RS-485 Si-TEC LAN (for inter module coms only) |
1x CAN proprietary |
Overview
Si-TEC³ CGC-D
Si-TEC³ CGC-G
Si-TEC³ CGC GENSET Controls – For Diesel and Gas Engines
The new Si-TEC³ CGC Genset controller is the latest generation Si-TEC controller to be produced by Heinzmann Australia and can be used in a wide range of diesel and gas genset applications in either islanded or co-generation.
The Si-TEC³ CGC Genset controller includes some great new features like ethernet, and dual dynamic logging coupled with improved processing power and optimised hardware design the Si-TEC³ CGC takes an already market leading product to the next level in genset power generation control.
The Si-TEC³ CGC digital governor function is fully integrated with generator control functions (i.e. synchronising, kW load control, kVAr/PF control, etc.).
Si-TEC³ CGC-D GENSET Controls – Diesel Engines
The Si-TEC³ CGC-D is used in diesel fuelled reciprocating engines for generator set applications where utility paralleling functions are required. Digital governor functions are fully integrated with generator control functions (i.e. synchronising, kW load control, kVAr/PF control, etc.).
More information
- Precise speed governing typically within 0.1 % of operating speed at steady state
- Dual MPU (or prox.) speed sensors for redundancy
- Cranking, start fuel limiting, speed ramping
- Automatic synchronising with phase and voltage matching
- Fuel limiting to boost pressure
- Grid-parallel and islanded operation
- Isochronous/references/base load
- Load share and kW control
- Volt-kVAr share control
- Wide range of control valve actuator drivers available
- Si-TEC³ GSM Master compatible – Single/multiple GSM control
- Load share with all Si-TEC³ CGC including turbines/extraction turbines and diesel generators
- Dedicated communications port for customer PLC/DCS interface
- SD card with dual dynamic logging feature
- 24 Si-TEC unit capacity with standard system logging feature
- Extensive user selected control functionality
- Extensive alarm functions
- TCP-IP ethernet port
- On-board diagnostic
Applications
Mining
Oil & Gas
Standby Power Systems
Hospitals
Utility GenerationSi-TEC³ CGC-G GENSET Controls – Gas Engines
The Si-TEC³ CGC-G is used in gas fuelled reciprocating engines for generator set applications where utility paralleling functions are required. Digital governor functions are fully integrated with generator control functions (i.e. synchronising, kW load control, kVAr/PF control, etc.)
- Precise speed governing typically within 0.1 % of operating speed at steady state
- Dual MPU (or prox.) speed sensors for redundancy
- Cranking, start fuel limiting, speed ramping
- Automatic synchronising with phase and voltage matching
- Fuel limiting to boost pressure
- Grid-parallel and islanded operation
- Isochronous/references/base load
- Load share and kW control
- Volt- kVAr share control
- Wide range of control valve actuator drivers available
- Si-TEC³ GSM Master compatible – Single/multiple GSM control
- Load share with all Si-TEC³ CGC including turbines/extraction turbines and diesel generators
- Dedicated communications port for customer PLC/DCS interface
- SD card with dual dynamic logging feature
- 24 Si-TEC unit capacity with standard system logging feature
- Extensive user selected control functionality
- Extensive alarm functions
- TCP-IP ethernet port
- On-board diagnostic
Applications
Mining Oil & Gas Standby Power Systems Hospitals Utility Generation